High Density Indoor RGBW Flex Strip
High Density Indoor RGBW Flex Strip
$360.00
This 24V High Brightness RGBW Flex gives you colour and white on the same strip, which can be controlled together or independently. Our controllers allow for the ideal lighting design for your project. Please note that RGBW requires a 5-conductor low voltage wire to operate.
Available in RGB + natural white in 20M reels.
Product Options:
In stock
High Density Indoor RGBW Flex Strip
Using 7 watts per foot, this 24V High-Density Indoor RGBW Flex strip comes in 20 meter (65.6′) lengths that can be cut every six LEDs. The 72 LEDs per meter feature provides soothing multi-colour lighting for use in any indoor application.
5-conductor RGBW lights can add that extra touch to your entertainment center, cove lighting, and under the toe kick of your kitchen cabinets. This RGBW flex strip features the 4-in-1 split chip technology where one chip emits all the possible colour combinations, which also increases the overall brightness.
The 3M adhesive tape on the back of the PCB allows for easy installation. When you connect your lights to one of our RGBW Controllers, you will have control over the light colour, brightness, fade speed, and light effects. The controllers are available in RF, WiFi or Bluetooth configurations. The RGBW SMD 5050 Chip produces seven static colours, which mix with the single colour white.
Solderless RGBW connectors are available for adding leads, making turns, and splicing the RGB Flex. Setup does not get any easier than this. To use RGBW Flex, you will need a controller, and a 24V DC power supply. This RGBW flex IP20 rated is for indoor use only.
Please note that this is the high brightness alternative to the 60LED/m Indoor RGBW Flex Strip.
Canadian support is available both before and after the sale. We will assist you in layout and design as well as provide tech support for any product you purchase from us. Call us Toll Free at 800-677-2698 or email info@ledlightscanada.com. We are here to help.
Length: | 20m (65.6′) |
Cuttable: | every 6 LEDs |
PCB Colour: | White |
Width: | 12mm |
Depth: | 2mm |
LEDs/m: | 60 |
Wattage: | 23W/m (7W/ft) |
Chip Type: | 5050 Split Chip |
Beam Angle: | 120 degrees |
Input Voltage: | 24V DC |
Mounting: | 3M 200MP Double Sided Tape |
Environment: | Indoor, non-coated |
UV/IR Radiation: | None |
Lifespan: | 50,000+ hours |
Brightness: | 1000 lumens |
There are no reviews yet.