200W 12V Dimmable LED Driver

200W 12V Dimmable LED Driver

(1 customer review)

$190.00

Triac Dimmable 200 watt 12V DC Constant Voltage LED driver. Certified for use in a dry or wet locations. Supplied with metal junction box enclosure for easy installation.

Features:

  • Triac Dimmable
  • Overload Protection
  • Open Circuit Protection
  • Short Circuit Protection
  • Over Temperature Protection
  • Limited five-year warranty
  • Flicker-free Dimming

Product Options: 

In stock

SKU: DVR907 Categories: , ,

200W 12V Dimmable LED Driver

This high capacity 200W 12V Dimmable LED Driver can supply power to your larger LED lighting projects. Due to its high output capacity, it is an excellent choice to use with our 2216 dot-less under cabinet kitchen lights. Additional uses are for more extended runs. This could include cove lighting or long outdoor step lights. We are always glad to assist you in determining the proper layout and requirements for your project. You can give us a call or send us a message.

Do you want to install your driver outside? The IP67 rating on this 12V DC driver makes it suitable for wet locations. These drivers are cETL certified and come pre-installed in the included junction box. The metal electrical box has separate compartments for line and low-voltage wires meeting all Canadian electrical code requirements.

Because this driver is Triac dimmable, it will work with most standard wall dimmers. We recommend the Lutron DVCL-153P dimmer, but it will also work with many others.

Canadian support is available both before and after the sale. We will assist you in layout and design as well as provide tech support for any product you purchase from us. Call us Toll Free at 800-677-2698 or email info@ledlightscanada.com. We are here to help.

If you live in Canada, it is a delight to us that you have made the choice to “put your money where your house is”. LED lights Canada has been helping Canadians for over 15 years and we are glad to share our experience with you.

Driver Size: 256 x 78 x 47 mm (10.07 x 3.07 x 1.85 inches)
Junction Box Size: 406 x 87 x 60 mm (16 x 3.4 x 2.36 inches)
Input: 100-130V AC 50/60Hz
Input Current: 3.2A
Output: 12V DC, Constant Voltage
Rated Power: one wire supplying a total of 200W
Triac Dimmable
Output Current: 16.6A max
Minimum Load: 10 watts
Maximum Load: 200 watts
Short Circuit, Open Circuit, Temperature, and Overload protection
Wet Rated (indoor/outdoor rated)
Temperature: -40C – +60C
Ambient Temperature ta: Max. 40 C
Certification: Class II AC Input (2-wire connection, requires no ground)- Complies with FCC Part 15B

 

1 review for 200W 12V Dimmable LED Driver

  1. James Teresi (verified owner)

    This 200W Dimmable Indoor/Outdoor LED driver was delivered quickly and well packaged. It was a bit larger than expected but appears well made. The black metal enclosure is solid and well ventilated. Easy set up and thus far is doing a great job powering my Armacost outdoor RGB LED lightstrips – about 28 feet in length total. No noise or hum from the unit. My previous Magnetic LED driver had a melt down (literally) after 4 years. This product was stated to have a 5 year warranty -lets hope it lasts twice as long!

Add a review

Your email address will not be published. Required fields are marked *