24V Indoor RGB Flex Strip

24V Indoor RGB Flex Strip


Time to add some colour to your home or office? This 24V RGB flex is easy to install with the 3M tape on the back of the strip. Only 2.5w/ft and operate using Bluetooth, WiFi or RF controllers. You can browse our selection of RGB controllers here.

Available in 20 meter reels. For indoor use only.

Product Options: 

Out of stock

24V Indoor RGB Flex Strip

Using only 2.5 watts per foot, this 24V Indoor RGB Flex Strip comes in 20M (65.5′) meter lengths. The maximum linear length is 60 feet before experiencing a voltage drop. The 30 LEDs per metre feature provides soothing multi colour lighting for use in any indoor application. This strip is cuttable every 5 LEDs.

RGB lights can add that extra touch to your entertainment center, cove lighting, under the toe kick of your kitchen cabinets. You can use it for up-lighting, creating a dramatic effect in your home or business. RGB is also often used on the back of a TV to create a halo effect.

Connect your lights to one of our RGB Controllers for total control over the light colour, brightness, fade speed and pre-programmed light effects. The SMD 5050 Triple Chip produces seven static colours, which mix to create millions of colours.

The pre-applied 3M 200MP adhesive tape allows for simple peel and stick installation. Solderless RGB connectors are available for adding leads, making turns and splicing the RGB Flex. Setup does not get any easier than this. To use RGB Flex, you will need the flex strip, a controller, and an appropriately sized 24V DC constant voltage LED Driver. This RGB flex is IP20 rated for indoor use only.

Browse our full selection of non-dimmable 24V Power Supplies.

Canadian support is available both before and after the sale. We will assist you in layout and design as well as provide tech support for any product you purchase from us. Call us Toll Free at 800-677-2698 or email info@ledlightscanada.com. We are here to help.

Strip length: 20 Meters (65.6′)
Cuttable: every 5 LEDs
Maximum Linear Length: 60 feet installed
PCB Colour: White
Width: 10 mm
Depth: 2 mm
LEDs per Meter: 30
Watts: 7.2W/m (2.5W/ft)
Chip Type: RGB Triple Chip 5050 SMD
Lumens: 280-300/m
Beam Angle: 120 degrees
Input Voltage: 24V DC
Mounting: 3M 200MP Double Sided Tape
Finish: Indoor Use Only, non coated, White PCB
UV/IR Radiation: None
Lifespan: 50,000+ hours


There are no reviews yet.

Be the first to review “24V Indoor RGB Flex Strip”

Your email address will not be published. Required fields are marked *