YG Colour Select Gimbal

YG Colour Select Gimbal

MSRP: $

$24.50

4-inch CCT selectable Gimbal is enclosed on the backside making the light airtight. Colour select to either 30k, 40K or 50K when you install.  Energy-efficient using only 9 watts and producing 810 lumens. The light head rotates 20 degrees allowing you to “point” the light.

Product Options:

In stock

PDF
SKU: POT9002 Categories: , Tags: , , , ,

This 4-inch YG Colour Select Gimbal panel light allows you to rotate the head and point the light. It is energy-efficient, requiring only 9 watts to produce 810 lumens of light!

The gimbal uses quality Epistar LEDs producing light at a 180-degree angle.  The rotation of the gimbal is 20 degrees. The wide-angle and rotation allow you to flood a wall with light without any hot spots sometimes seen from lights with a narrow beam spread.

CCT Selectable and Dimmable

There is a choice to set this light to either 30K, warm white, 40K, Natural white, or 50K, cool white. A simple slide switch inside the connection box allows the colour change. The light is approved to use without a typical pot light housing and is IC rated, allowing for direct contact with insulation. Also, it is IP44 damp rated. Installation only requires 1.12″ of clearance above the drywall. They are dimmable and have a CRI of 80Ra.

Adding the gimbal to our YG line of lights assures accurate, consistent light colour when mixed in the same room.  All YG lights all come with a 5-year warranty.

Input Voltage: 120V AC 60 Hz
Rated Power: 9W
Driver Type: Constant Current Output
IC Rated: YES
Dimmable: YES
Lifespan: 50,000 Hours
Lumens: 810
Warranty: 5 Years
Trim Colour: White
Beam Angle: 180 Degrees
Rotation: 20 DegreeIP Range: IP44
Cutout: 4.25″
Certifications: cTLus, Energy Star

 

 

Reviews

There are no reviews yet.

Be the first to review “YG Colour Select Gimbal”

Your email address will not be published. Required fields are marked *