Indoor RGBW Flex Strip

RGBW Indoor Flex Strip
RGBW Indoor Flex Strip
5W RGBW Flex Strip

Indoor RGBW Flex Strip


RGBW Flex gives you colour and a single colour on the same strip. The LEDs alternate, and you can control them together or independently. Our controllers allow for the ideal lighting design for your project. Please remember that RGBW requires a 5-conductor low voltage wire to operate.

Available in RGB+3000K warm white, RGB+4000K natural white, and RGB+6000K cool white in 5M reels.

Product Options:

SKU: FLX954 Categories: , ,

Indoor RGBW Flex Strip

Using only 4.5 watts per foot, this Indoor RGBW Flex-strip comes in 5-meter lengths (16.4′) and can be cut every 6 LEDs. The 60 LEDs per metre feature provides soothing multi-colour lighting for use in any indoor application.

5-conductor RGBW lights can add that extra touch to your entertainment center, cove lighting, and under the toe kick of your kitchen cabinets. This RGBW flex strip has alternating RGB and single colour LEDs. WIth the single colour in a full chip, you get the maximum amount of task lighting under your cabinets.

3M adhesive tape on the back of the PCB allows for easy installation. When you connect your lights to one of our RGBW Controllers,  you will have control over the light colour, brightness, fade speed, and light effects. The controllers are available in RF, WiFi or Bluetooth configurations. The RGB SMD 5050 Triple Chip produces seven static colours, which mix with the single colour SMD 5050 chip.

Solderless RGBW connectors are available for adding leads, making turns, and splicing the RGB Flex. Setup does not get any easier than this. To use RGBW Flex, you will need the flex strip, a controller, and a 12V DC power supply to operate your RGBW flex strip. This RGBW flex IP20 rated is for indoor use only.

Canadian support is available both before and after the sale. We will assist you in layout and design as well as provide tech support for any product you purchase from us. Call us Toll Free at 800-677-2698 or email We are here to help.

Strip length: 5 Meters (16.4′)
Cuttable: every 6 LEDs
PCB Colour: White
Width: 12 mm
Depth: 2 mm
LEDs per Meter: 60 Watts: 14.4W / M
Chip Type: alternating RGB Triple Chip 5050 SMD and single colour 5050 SMD
Beam Angle: 120 degrees
Input Voltage: 12V DC
Mounting: 3M 200MP Double Sided Tape
Finish: Indoor Use Only, non coated, White PCB
UV/IR Radiation: None
Lifespan: 50,000+ hours
Lumens for RGB Warm White: 700-800lm
Lumens for RGB Nature White: 820-850 lm
Lumens for RGB Pure White: 900-950lm


There are no reviews yet.

Be the first to review “Indoor RGBW Flex Strip”

Your email address will not be published.